Designed and manufactured in Australia, the 3580 series electric
mortice is a high performance lock of superior quality. It is
constructed from high grade zinc alloy, with a stainless steel
latch bolt and face plate and is suited for all commercial
applications.
The lock can be operated by push buttons,intercom systems and
key switches; or integrated with electronic access control systems
for use with higher security devices such as keypads or card
readers.
The 3580 series is available in a wide variety of configurations
to suit varying requirements and is especially suited to narrow
style or short backset applications.
Key Features
Available in non monitored and monitored versions.
Monitoring features
- Dead latched
- Door position/reed switch
- Key override
- Request to exit/REX
Available configurations
- Fail safe or fail secure
- 12Vdc or 24Vdc
- Field changeable monitoring contacts - normally closed,
normally open
- Field changeable handing - Left hand and right hand doors
- Selection of free lever or locked lever on both sides of the
door
- Key override monitoring
- LED indication
Standards and Compliance
- S3 (Security) Australian Lock Standard (AS4145.2.1993)
- D3 (Durability) Australian Lock Standard (AS4145.2.1993)
- C-Tick Certified
Voltage
Available in 12Vdc or 24Vdc
Current
12Vdc ± 5% 250mA (max)
24Vdc ± 5% 125mA (max)
LED Current
When LED's are fitted, add 15mA (max) to total current
draw
Monitoring
Key override
Deadlatched and door closed
Request to exit
Hub/Deadlatch/Key override monitor: max ratings 500mA at
30Vdc
Door Status Monitor: max ratings 3W, 250mA (max) at
12Vdc,
125mA (max) at 24Vdc
Environment
Operational temperature range -20°c to + 60°c
Case/Cover
High purity zinc alloy construction
Backset
23mm standard. 25.4, 30 & 38 mm extended
available
Latch bolts
15mm Stainless Steel construction
Door Clearance
3 - 6.5 mm
Door thickness
Standard applications 32 to 50mm
Extension kits available
Cylinder
Standard Lockwood oval shaped cylinders
Cabling
3.6 metre length of cable with 9 pin socket supplied with each
lock.
Recommended cabling: 18AWG (0.82mm²) cable runs up to 30m
Furniture
Compatible with Lockwood series door furniture
Standard Finishes
Satin Chrome(SC) standard. Bright Chrome (CP) and
Polished Brass(PB) finishes available
Note: For detailed electrical specifications, please refer
to catalogue.
Specification Statement
The lock should be capable of operation on voltages of 12 or 24Vdc
and have a current consumption not more than 250mA (max) @12Vdc and
125mA (max) @24Vdc. Monitored locks must be capable of monitoring
the following functions: Key override, door position/reed switch
& independent hub/ Request to exit. All monitoring outputs must
have the ability to be wired independently. The lock must be
capable of operating fail safe or fail secure, left or right hand,
and have field configurable hub selection.
Ordering Information
Please refer to catalogue