Lockwood 726 Series Door Closer Lockwood 726 Series Door Closer Lockwood 726 Series Door Closer A range of adjustable power door closer units suitable for architectural and commercial applications. Specification Power EN adjustable 2 to 6. Back check (BC) Adjustable. Hold Open Adjustable. Hold-open can be set at any angle up to 150° of opening. Handing Non-handed.Suitable for left or right hand doors. Cover Clip-on. Materials Extruded aluminium body manufactured from high-performance silicon alloy. Mechanism Rack and pinion design. Mounting Regular, parallel and over-door mounting. Valves Adjustable closing and latching speed valves with overload protection. Standards and Compliance The Lockwood 726 series closer has been successfully tested up to four hours (depending on type of doorset) on fire door assemblies in accordance with Australian Standard AS1905.1:2005, Part: Fire Resistant Door sets. Note: Hold open option is not approved on any fire door. Close Downloads 7726-726 Parallel Arm Mounting Template LH RH.pdf (.pdf, 573 kB) 7726-726 Standard Arm Mounting Template LH RH.pdf (.pdf, 696 kB) 7726-7714 Parallel Arm Drop Plate Mounting Template.pdf (.pdf, 130 kB) Lockwood Surface Mounted Door Closers Catalogue.pdf (.pdf, 4.7 MB) Close Where to buy? Find your local Lockwood stockist. Lockwood 7714SRDA Series Premium Range Surface Mounted Door CloserEN power adjustable 1 to 4 Lockwood 7726SRDA Series Premium Range Surface Mounted Door CloserEN power adjustable 2 to 6. Lockwood 7726DA Series Premium Range Surface Mounted Door CloserEN power adjustable 2 to 6.