Lockwood Paradigm Pull Handle Lockset - Self Latching Single Cylinder

Interior view
Interior view
Interior view
Interior view
Interior view
Interior view
Dummy Handle
Dummy Handle

This Australian designed lockset comes in three variants including a Double Cylinder Deadbolt, Self-Latching Single and Double Cylinder

The Self-Latching Single and Double cylinders are specifically designed to meet the fire-rating requirements of semi-commercial and apartment buildings and have been successfully tested up to 2 hours (depending on the type of doorset) on fire door assemblies in accordance with Australian Standard AS1905.1-2005, part1: Fire Resistant Doorsets.
In addition to fire-rating, the range also incorporates innovative design and contemporary style that will be an excellent choice for an elegant entrance to your building

* For questions concerning our fire rated products, their specifications and their utilisation please contact ASSA ABLOY or relevant Fire Door manufacturer.

Key Features

  • Conforms to the security and durability requirements of Australian Standard AS4145.2-2008 | SL8D8C6K5
  • High security cut resistant Stainless Steel bolt for added security
  • Brushed 304 grade Stainless Steel Pull Handle
  • Concealed screw fixings provide a neat and clean appearance
  • Can be matched with any of Lockwood's internal levers for a stunning and contemporary look throughout the house
  • Can be matched with dummy (non-functioning) pull handle for double door applications

LockAlert
The Paradigm® Pull Handle Lockset incorporates Lockwood's patented LockAlert status indicator that shows the Lockset mode at a glance. The lockset can operate in three modes:

Safety Mode
Locked from the outside and free to exit from inside.
Passage Mode
Free to enter from outside and free to exit from inside.

DualSelect®
Turn the key for safety mode.Turn the key further to select secure mode.

SafetyRelease™
Automatically unlocks the internal knob upon entry minimising the risk of being locked in.

Anti-Corrosion
Successfully tested in accordance with AS2332.3.1:2001 neutral salt spray test.
Kinetic Defence®
Bump and pick resistant.
2 Keys Included
Can be keyed alike to other Lockwood door locks.
Specification

Backset
60mm standard, 70mm can be purchased separately.

Dimensions
External handle length - 600mm
Internal handle length - 500mm
Handle width - 30mm

Cylinder

  • 5 pin tumbler mechanism
  • Brass cylinder and brass barrel

Keying

Standard Keying

  • Supplied individually keyed with two keys per lock
  • 78,000 key combinations
  • Key blank KB2015P
  • AS 4145.2-2008 K5

Restricted Special Keying

Lockwood locks can be keyed to a number of controlled and/or specially keyed systems.

These range from legally protected keys to protect against unauthorised duplication, which can also include specially designed key systems such as master key systems, which allow for different levels of mechanical access control.

Dummy (non-functioning Pull Handle)
The dummy (non-functioning) Pull Handle will compliment a double door application with a stunning look that makes entrance to the house as elegant with contemporary design.

Part numbers
Display Pack


Paradigm Pull Handle Lockset

Description Part Number Barcode
Single Cylinder Deadlatch (Stainless Steel) 005/SPHLSSS 9340116023601
Dummy (Stainless Steel) 005/PHDSSS 9340116023618
Find your local Lockwood stockist.