Lockwood Padde Series ES9000 Pre-Load Electric strike

Lockwood Padde Series ES9000 Pre-Load Electric strike
Lockwood Padde Series ES9000 Pre-Load Electric strike
Lockwood Padde Series ES9000 Pre-Load Electric strike
Lockwood Padde Series ES9000 Pre-Load Electric strike

The ES9000 has been designed to suit the harshest commercial environments, and has the unique feature of the ability to operate with up to 25kg of pre-load pressure on the keeper. Pre-load is a common condition that is caused by pulling on a door before it unlocks, the weight of warped or drooping doors, seals on fire doors, or by differential air pressure created when heating and cooling systems are in use.

Standard features include multi voltage 10 - 30Vdc and field changeable settings from fail safe to fail secure.

Built to last, this is a premium locking solution that has been tested in excess of 2 million cycles and boasts unique features like no other available on the market today.

Key Features

  • Operates under pre load up to 25kg
  • Easy field selectable fail safe/fail secure
  • Multi voltage 10-30Vdc
  • 1300kg holding force
  • 2.5 million cycles endurance rating
  • Latch keeper is significantly quieter in operation
  • Weather resistant
  • Mounting tabs as standard
  • Non handed
  • TRICARE® 5 Year Warranty
  • Weather Resistant (IP54)
  • Built in Protection Diode

Applications

  • High traffic areas
  • Doors subjected to side load (pre load)
  • Fire rated door sets
  • Open in/open out doors
  • Suitable for use with all access control systems

Standards and Compliance

  • S3 (Security) Australian Lock Standard (AS4145.2.1993)
  • D3 (Durability) Australian Lock Standard (AS4145.2.1993)
  • Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)
  • CE Approved
  • C-Tick Certified
  • IP 54 Rating
  • SCEC Approved for Security Level 3
Specification

Voltage
10 - 30Vdc

Current
250mA @12Vdc - 130mA @24Vdc

Solenoids
Solenoid rated for continuous use

Electrical protection
Polarity and back EMF protected

Monitoring
Solenoid Monitor - 1 amp NO/NC microswitch
Door / Latch Monitor - 1 amp NO/NC microswitch

Holding force
1300kg static strength rating

Endurance
1,200,000 cycles endurance rating @ 25kg pre-load
2,500,000 cycles general durability without pre-load conditions

Latching
Suitable for 15mm latch with 3mm door gap

Environment
Operational temperature range - 20C to +60C

Body
Solid Stainless Steel Construction

Keeper
Stainless Steel

Specification Statement
The electric strike should be fully monitored and have independent door / latch and solenoid monitor switches. Holding force for the strike should be not less than 1300kg.

Where Power to Lock and Power to Open functions may be required in the same building, a single electric strike should be interchangeable from either fail safe or fail secure from the rear of the strike.

The electric strike should not consume current greater than 250mA @ 12Vdc and have a solenoid rated for continuous use. A fire rating not less than 4 hours is required where applicable. The strike must be capable of operating with up to 25kg of pre-load pressure applied to the keeper, be tested to 2.5 million operations and carry a minimum warranty of 5 years.

_________________________________________________________

Dimensions

Part numbers
Trade Pack
Description Part Number
ES9000 E/Strike 12-30Vdc M/Funtion Preload
Monitored
ES9000
ES9000 E/Strike 12-30Vdc M/Funtion Preload
Monitored No Lip
ES9000-010
ES9000 E/Strike 12-30Vdc M/Funtion Preload
Monitored 8mm Lip
ES9000-020
ES9000 E/Strike 12-30Vdc M/Funtion Preload
Monitored Lip Holes
ES9000-060

Note: All ES9000 series electric strikes are supplied in Fail Safe configuration.

 

Accessories

Description Part Number
13mm Rebate Plate 210100-541
25mm Extension Lip (40.5mm total) 220200-505
50mm Extension Lip (65.5mm total) 220200-506
75mm Extension Lip (90.5mm total) 220200-507
Mounting Kit 220200-519

ES9000 Product Testing

Find your local Lockwood stockist.