Lockwood 9000/9100 Series Rim Type Panic Exit Device

Lockwood 9000/9100 Series Rim Type Panic Exit Device
Lockwood 9000/9100 Series Rim Type Panic Exit Device
Lockwood 9000/9100 Series Rim Type Panic Exit Device
Lockwood 9000/9100 Series Rim Type Panic Exit Device

The Lockwood 9000/9100 Rim Type Panic Exit Device is designed to provide a ready means of escape at all times by the single action of pushing on a horizontal bar fitted across the full width of a door.

Lockwood 9000 Series Panic Exit Devices are available in a range of functions. Mechanism design ensures easy installation, clean styling and ease of operation.

Slim, neat design, surface mounted, dead latching, cylinder key hold-back (dogging), wide selection of furniture, non-handed.

Lockwood 9000 Series Panic Exit Devices have been successfully tested on fire door assemblies in accordance with AS 1905.1: 1997 Fire Resistant Doorsets.

Suitable for single or double doors, timber, metal, narrow profile, glass security and fire doors.

Features of the 9000/9100 Series Rim Type Panic Exit Device

  • Deadlatching on all bolts
  • Safety clutch outside lever trim plate protects the unit from damage that could render the device inoperable
  • Adjustable on site
  • Surface mounted for ease of installation
  • Pick resistant bottom latch
Specification

Handing
Non-handed

Materials

  • The body is manufactured of steel
  • Internal mechanisms made of steel or brass
  • Main cover made of decorated electroplated steel pressing
  • Secondary cover made of decorated Zamak
  • Horizontal bar made of decorated steel
  • Lever plate operating mechanism is made from electroplated steel pressings with high density zinc alloy cover

Latchbolt
Made of double chrome plated steel

Auxiliary Bolt
Made of double chrome plated steel

Door Thickness

  • Standard 35 to 45mm doors
  • Extended spindle kit for up to 90mm doors
  • Mortice lock version 32 to 48mm doors specify door thickness when other than standard.

Product Width

  • Standard maximum 838mm to suit (900mm) door
  • 1141 to suit (1200mm) door

Door Stile
Suitable for both 90° and flush head door stiles minimum head clearance requirement of 30mm.

Outside Trims

  • Key entry, key entry with pull plate and key/ lever entry with mechanism safety override
  • Hold-back (dogging)
  • Euro cylinder key hold-back available on all types
  • Hold-back is not an approved function on fire doors

Standard Finishes

  • Body – Silver, Powdercoat
  • Touchbar – Black, Powdercoat

Keying

Standard Keying

  • Cylinders, if required, are to be ordered separately
  • Supplied individually keyed with two keys per lock
  • 78,000 key combinations
  • Key blank KB2015P

Restricted Special Keying

Lockwood locks can be keyed to a number of controlled and/or specially keyed systems. These range from legally protected keys to protect against unauthorised duplication, which can also include specially designed key systems such as master key systems, which allow for different levels of mechanical access control.

Find your local Lockwood stockist.