Lockwood 9300/9400 Series Vertical Type Panic Exit Device Lockwood 9300/9400 Series Vertical Type Panic Exit Device Lockwood 9300/9400 Series Vertical Type Panic Exit Device Lockwood 9000 Series Panic Exit Devices are available in a range of functions. Mechanism design ensures easy installation, clean styling and ease of operation. The Lockwood 9300/9400 Vertical Type Panic Exit Device is designed to provide a ready means of escape at all times by the single action of pushing on a horizontal bar fitted across the full width of a door. Slim, neat design, surface mounted, dead latching, automatic top and bottom latches maintaining the bolt drawn in when the door is open, pick resistant bottom latch, cylinder key hold-back (dogging), wide selection of furniture, non-handed. Lockwood 9000 Series Panic Exit Devices have been successfully tested on fire door assemblies in accordance with AS 1905.1: 1997 Fire Resistant Doorsets. The basic 9000 Series Horizontal Panic Exit Device is suitable for timber, metal and security glass doors with mid rail. Single and double door applications of 900 or 1200mm wide doors, 2300mm standard up to 3000mm in height. Features of the 9300/9400 Series Vertical Type Panic Exit Device Deadlatching on all bolts Safety clutch outside lever trim plate protects the unit from damage that could render the device inoperable Adjustable on site Automatic top and bottom latches maintaining the bolt drawn in when the door is open Surface mounted for ease of installation Pick resistant bottom latch Specification HandingNon-handedMaterials The body is manufactured of steel Internal mechanisms made of steel or brass Main cover made of decorated electroplated steel pressing Secondary cover made of decorated Zamak Horizontal bar made of decorated steel Lever plate operating mechanism is made from electroplated steel pressings with high density zinc alloy cover LatchboltMade of double chrome plated steel Auxiliary BoltMade of double chrome plated steel Door Thickness Standard 35 to 45mm doors Extended spindle kit for up to 90mm doors Mortice lock version 32 to 48mm doors specify door thickness when other than standard. Product Width Standard maximum 838mm to suit (900mm) door 1141 to suit (1200mm) door Door Height Standard maximum height 2300mm (vertical rod version) For doors between 2300 to 3000mm in height, order extension rod kit part no. 9000/50SIL Installed with centre line of exit device at 1023mm above finished floor level Door StileSuitable for both 90° and flush head door stiles minimum head clearance requirement of 30mm. Outside Trims Key entry, key entry with pull plate and key/ lever entry with mechanism safety override Hold-back (dogging) Euro cylinder key hold-back available on all types Hold-back is not an approved function on fire doors Standard Finishes Body – Silver, Powdercoat Touchbar – Black, Powdercoat Keying Standard Keying Cylinders, if required, are to be ordered separately Supplied individually keyed with two keys per lock 78,000 key combinations Key blank KB2015P Restricted Special Keying Lockwood locks can be keyed to a number of controlled and/or specially keyed systems. These range from legally protected keys to protect against unauthorised duplication, which can also include specially designed key systems such as master key systems, which allow for different levels of mechanical access control. Close Downloads Lockwood Panic Exit Devices Catalogue.pdf(.pdf, 1.7 MB) Close Find your local Lockwood stockist. Lockwood 9000/9100 Series Electromechanical Rim Type Panic Exit DeviceSuitable for single and double door applications. Lockwood 9300/9400 Series Electromechanical Vertical Type Panic Exit DeviceSuitable for single and double door applications. Lockwood 9500/9600 Series Rim Type Panic Exit Device with Mortice LockUsed in conjunction with the 3572 Mortice Lock.