Lockwood 7726DA Series Premium Range Surface Mounted Door Closer Rack and Pinion adjustable power door closer suitable for architectural and commercial applications. Specification Power EN adjustable 2 to 6. Back check (BC) Adjustable. Hold Open Adjustable. Hold-open can be set at any angle up to 150° of opening. Handing Non-handed.Suitable for left or right hand doors. Cover Fully formed metal. Materials Extruded aluminium body manufactured from high-performance silicon alloy. Mechanism Rack and pinion design. Mounting Regular, parallel and over-door mounting. Valves Two pressure relief valves are a standard feature to protect against abuse. Delayed Action Adjustable. Standards and Compliance The Lockwood 7726DA series closer has been successfully tested upto four hours (depending on type of doorset) on fire door assemblies in accordance with Australian Standard AS1905.1:2005, Part: Fire Resistant Door sets. Note: Hold open option is not approved on any fire door. Close Downloads 7726-726 Parallel Arm Mounting Template LH RH.pdf (.pdf, 573 kB) 7726-726 Standard Arm Mounting Template LH RH.pdf (.pdf, 696 kB) 7726-7714 Parallel Arm Drop Plate Mounting Template.pdf (.pdf, 130 kB) Lockwood Surface Mounted Door Closers Catalogue.pdf (.pdf, 5 MB) Close Where to buy? Find your local Lockwood stockist. Lockwood 7714DA Series Premium Range Surface Mounted Door CloserEN power adjustable 1 to 4. Lockwood 2636FS Free-Motion® Door Closer with Cam-Motion® TechnologyEN power selectable EN3 to EN6. Lockwood 726SR Series Slide Door CloserEN power adjustable 2 to 6.