Lockwood 1220 Series Brass Door Handle - Lever 76

AS1428.1 Compliant

Simple and versatile, this elegantly styled round brass rose features concealed fixing.

The Lockwood Brass Door Furniture range is the culmination of decades of experience in the design and manufacture of high quality door furniture. Over the years the Lockwood brass door range has evolved as the product of choice for leading Australian architects in commercial, institutional and industrial applications.

Features of the 1220 Series Brass Rose Door Furniture

A removable stop screw allows all symmetrically designed levers (eg. Cadenza) to be handed on site. Levers of asymmetrical design (eg, Veloce) cannot be reversed. Specify handing left or right hand when ordering.
All Lockwood roses and levers contained in the 1220 series are of a solid brass construction.
Designed for use with Lockwood 3770 Selector & 3570 Synergy Series Mortice Latches and with A260 Tubular Latches.

What makes brass so good?
Proudly designed, assembled and customized in Australia, the Lockwood range is made from high quality brass.

Brass is highly durable
Brass has a low friction surface which makes it ideal for connected moving parts. This is why it is the perfect choice for producing high use door furniture that will prove durable with minimal servicing. Lockwood brass door furniture has been successfully tested to exceed the highest durability rating (D8, 500,000 cycles) under the Australian Standard (AS4145.2: 2008).

Brass is corrosion resistant
Brass door furniture provides durable performance in high corrosion applications. Unlike other commonly used materials it contains no iron so it will not rust or tea stain in high corrosion environments. Lockwood Brass Door Furniture in satin chrome brushed finish (SC) has been successfully tested under NATA conditions to maintain both function and finish under prolonged neutral salt spray test for over 1000 hours satisfying the highest ranking (C10) of the appropriate Australian Standard (AS4145.2: 2008). This result confirms that Lockwood Brass Door Furniture the ideal choice for use in coastal applications and other corrosive environments.

Brass is green
Lockwood Brass Door furniture is assembled in Australia, at ASSA ABLOY Australia’s ISO 1401 accredited manufacturing facility. Local assembly and customization implies less energy expenditure required.

Specification

Dimensions

Length: 125mm
Projection: 50mm
Finger clearance: 40mm

Handing
A removable stop screw allows all symmetrically designed levers (e.g. Cadenza) to be handed on site. Levers of asymmetrical design (e.g. Veloce) cannot be reversed. Specify left or right handed when ordering.

Materials
All Lockwood roses and levers contained in the 1220 series are of solid brass construction.

Fixing
Fully concealed on both sides.

Door Thickness
33mm minimum for 5260 Latches and 32mm minimum for Lockwood 3770 Selector & 3570 Synergy Series Mortice Latches. Maximum door thickness 50mm.

Finishes

Standard

Satin Chrome Brushed - SC

Non Standard

Architectural Bronze - AZ
Architectural Bronze Unlaquered - AU
Antique Copper - AC
Chrome Plate - CP
Oil Rubbed Bronze - ORB
Polished Brass - PB
Polished Brass Unlacquered - BU
Polyester Powdercoat - PC
Satin Brass - SB

Rose Dimensions

Downloads

Brass Door Furniture Mounting Instructions - 0620.pdf (.pdf, 1.7 MB) Brass Door Furniture Turnknob Mounting Instructions - 0420.pdf (.pdf, 1.5 MB) Lockwood Rose Door Handles Catalogue.pdf (.pdf, 16.2 MB)

Part numbers

Trade Pack

Description	Part Number
Round Rose Furniture - Full Set	1220/1221/76SC
Round Rose Furniture - Half Set Exterior	1220/76SC
Round Rose Furniture - Half Set Interior	1221/76SC
Round Rose Furniture - Fixed Half Set Exterior	1224/76SC
Symphony Round Rose Furniture - Fixed Half Set Interior	1225/76SC

Note: Items shown above feature the Satin Chrome Brushed finish (SC). For alternative finish substitute SC for appropriate finish.

Standard Finishes

Satin Chrome Brushed - SC

Non-Standard Finishes

Architectural Bronze - AZ
Architectural Bronze Unlaquered - AU
Antique Copper - AC
Chrome Plate - CP
Oil Rubbed Bronze - ORB
Polished Brass - PB
Polished Brass Unlacquered - BU
Polyester Powdercoat - PC
Satin Brass - SB

1220 Series Cylinder and Turn Escutcheons

A range of escutcheons for the fitting of cylinders, turnknobs and emergency turns are available in the same wide choice of metal finishes to complement all Symphony lever furniture installations.

Features of the 1220 Series Symphony Cylinder and Turn Escutcheons

Concealed fixing
Designed and manufactured in Australia
Turn escutcheons feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness

Selector 3700 Series Mortice Lock Through fix Escutcheon Kits

A new range of escutcheon kits has been introducted as part of the release of the new Selector 3700 Series Mortice Lock. This new range of escutcheon kits are designed to be fixed through the new mortice lock and door to provide more robust fixing.

Key Features

Supplied with two escutcheons to accomodate both exterior and interior functions
Supplied with two screws for through fixing which can be cut to length to suit 32-50mm door thickness
Designed to be fixed through the door for strength and durable performance
Uniform rose and escutcheon dimensions for a more aesthetically pleasing installation

Double Oval Cylinder Escutcheons Kit

1226/E Oval Cylinder Escutcheon

Part Number: 1226/6SC

Designed for use with Selector Series Mortice Locks. Concealed through fixing with stainless steel screws.

Escutcheons supplied
Exterior : Oval Cylinder
Interior : Oval Cylinder

Note: If only one oval cylinder escutcheon is required, please order 1226/ISC. Wood screws will be provided for surface fixing.

Oval Cylinder and Turnknob Escutcheons Kit

1226/E Oval Cylinder Escutcheon

Part Number: 1226/7NSC

Designed for use with Selector Series Mortice Locks. Concealed through fixing with stainless steel screws.

Escutcheons supplied
Exterior : Oval Cylinder
Interior : Oval Turnknob

Privacy Indicating Emergency Turn and Disabled Accessible Turnknob Escutcheons Kit

Privacy Indicating Emergency Turn Escutcheon

Privacy Indicating Accessible Turn Escutcheon

Part Number: 1228/9PRSC

Designed for use with Selector Series Mortice Locks. Concealed through fixing with stainless steel screws.

Escutcheons supplied
Exterior : Privacy Indicating Emergency Turn
Interior : Privacy Indicating Disabled Accessible Turnknob

Note: Handing is based on the door. A right-handed escutcheon kit suits a right-handed door, this kit will be supplied with a left-handed disabled accessible turnknob, as this turnknob is intended to be used on the interior side of the door. Only kits with disabled accessible turnknobs need handing.

Note: Items shown above feature common kit configurations, for more kit variations please refer to the ordering procedure in the product catalogue in the Downloads seciton.

Synergy Series Mortice Lock Escutcheons

Designed to be surface fixed with wood screws, concealed by a threaded rose trim.

Oval Cylinder Escutcheon

1226/E Oval Cylinder Escutcheon