Lockwood 1370 Series Brass Door Handles - Ving Lever 74

AS1428.1 Compliant Lever

Durable and versatile, this round, brass rose is suitable for a wide range of applications.

The Lockwood Brass Door Furniture range is the culmination of decades of experience in the design and manufacture of high quality door furniture. Over the years the Lockwood brass door range has evolved as the product of choice for leading Australian architects in commercial, institutional and industrial applications.

Features of the 1370 Series Rose Door Furniture

  • A removable stop screw allows all symmetrically designed levers (eg. Cadenza) to be handed on site. Levers of asymmetrical design (eg, Veloce) cannot be reversed. Specify handing left or right hand when ordering.
  • All Lockwood roses and levers contained in the 1370 series are of a solid brass construction.
  • Designed for use with Lockwood 3770 Selector & 3570 Synergy Series Mortice Latches and with 5260 Tubular Latches.

What makes brass so good?
Proudly designed, assembled and customized in Australia, the Lockwood range is made from high quality brass.

Brass is highly durable
Brass has a low friction surface which makes it ideal for connected moving parts. This is why it is the perfect choice for producing high use door furniture that will prove durable with minimal servicing. Lockwood brass door furniture has been successfully tested to exceed the highest durability rating (D8, 500,000 cycles) under the Australian Standard (AS4145.2: 2008).

Brass is corrosion resistant
Brass door furniture provides durable performance in high corrosion applications. Unlike other commonly used materials it contains no iron so it will not rust or tea stain in high corrosion environments. Lockwood Brass Door Furniture in satin chrome brushed finish (SC) has been successfully tested under NATA conditions to maintain both function and finish under prolonged neutral salt spray test for over 1000 hours satisfying the highest ranking (C10) of the appropriate Australian Standard (AS4145.2: 2008). This result confirms that Lockwood Brass Door Furniture the ideal choice for use in coastal applications and other corrosive environments.

Brass is green
Lockwood Brass Door furniture is assembled in Australia, at ASSA ABLOY Australia’s ISO 1401 accredited manufacturing facility. Local assembly and customization implies less energy expenditure required. 

Specification

Dimensions

Length: 120mm
Projection: 53mm
Finger clearance: 45mm

Handing
A removable stop screw allows all symmetrically designed levers (e.g. Cadenza) to be handed on site. Levers of asymmetrical design (e.g. Veloce) cannot be reversed. Specify left or right handed when ordering.

Materials
All Lockwood roses and levers contained in the 1370 series are of solid brass construction.

Fixing
Roses are designed to fit back to back.
If outside rose is specified with concealed fixing, then the inside rose must be visible fixed. Roses numbered 1370, 1372 and 1374 are concealed fixed, roses numbered 1371, 1373 and 1375 are visible fixed.

Door Thickness
33mm minimum for 5260 Latches and 32mm minimum for Lockwood 3770 Selector & 3570 Synergy Series Mortice Latches. Maximum door thickness 50mm.

Finishes

Standard

  • Satin Chrome Brushed SC

Non Standard

  • Architectural Bronze AB
  • Architectural Bronze Unlaquered AU
  • Antique Copper AC
  • Chrome Plate CP
  • Polished Brass Unlacquered BU
  • Polished Brass PB
  • Polyester Powdercoat PC
  • Satin Brass SB
  • Oil Rubbed Bronze ORB

Rose Dimensions

Close
Part numbers
Trade Pack
Description Part Number
Round Rose Furniture Full Set 1370/1371/74SC
Round Rose Furniture - Half Set 1370/74SC
Round Rose Furniture - Fixed Half Set 1374/74SC

 

1370 Blank Roses

Description Part Number
Blank Rose - Exterior 1372SC
Blank Rose - Interior 1373SC


Note: Items shown above feature the Satin Chrome Brushed finish (SC). For alternative finish substitute SC for appropriate finish.

 

Standard Finishes

Satin Chrome Brushed - SC

Non-standard Finishes

Polished Brass - PB
Chrome Plate - CP
Polished Brass Unlaquered - BU
Polyester Powdercoat - PC
Satin Brass - SB
Architectural Bronze - AB
Architectural Bronze Unlaquered - AU
Antique Copper - AC
Oil Rubbed Bronze - ORB

 

 

Selector 3700 Series Mortice Lock Through fix Escutcheon Kits

Designed to be fixed through the door for strength and durable performance.

Description Part Number
Double Oval Cylinder Escutcheons Kit 1376/6SC
Oval Cylinder and Turnknob Escutcheons Kit 1376/7NSC
Privacy Indicating Emergency Turn and Privacy Indicating Disabled Accessible Turnknob Escutcheons Kit 1378/9PRSC

 

Notes:

If only one oval cylinder escutcheon is required, please order 1376/ESC. A grub screw will be supplied for concealed fixing.

Only kits with Disabled Accessible Turnknobs require handing. Handing is based on the door. A right-handed escutcheon kit suits a right-handed door, this kit will be supplied with a left-handed disabled accessible turnknob, as this turnknob is intended to be used on the interior side of the door.

Items shown above feature common kit configurations, for more kit variations please refer to the ordering procedure in the product catalogue in the Downloads section.

 

Synergy Series Mortice Lock Escutcheons

Designed to be surface fixed with wood screws.

Description Part Number
Oval Cylinder Escutcheon 1376/ESC
Oval Turnknob Escutcheon 1377/INSC
Privacy Indicating Oval Turnknob Escutcheon 1377/IPSC
Emergency Turn Escutcheon 1378/INSC
Privacy Indicating Emergency Turn Escutcheon 1378/IPSC
Disabled Accessible Turnknob Escutcheon 1379/INLSC
Privacy Indicating Disabled Accessible Turnknob Escutcheon 1379/IPLSC

 

Note: Items shown above feature the Satin Chrome Brushed Finish (SC). For alternative finish substitute SC for appropriate finish.

Close

Where to buy?

Find your local Lockwood stockist.

Lever 123

62.5mm Rose.

Lever 142

62.5mm Rose, AS1428.1 Compliant Lever.

Lever 90

62.5mm Rose, AS1428.1 Compliant Lever.