Lockwood Padde Series ES150 Surface Mounted Electric Strike Lockwood Padde Series ES150 Surface Mounted Electric Strike Lockwood Padde Series ES150 Surface Mounted Electric Strike ES150 is a surface mounted electric strike suitable for use with rim or surface type dead latches. This strike is easy to install and can be simply controlled by a keypad, keyswitch or integrated into any access control system. ES150 offers high levels of security and features usually provided by more expensive electric locking solutions. The electric strike can be easily installed on steel and wooden door frames. A Weather resistant version is also available for exterior applications. Key Features Configure to fail safe or fail secure Easy installation suitable for steel and wooden door frames Stainless steel striker for extra strength and durability Multi Voltage 12Vdc & 24Vdc Solenoid rated for continuous use IP56 weather resistant version available TRICARE 5 Year Warranty Applications Surface or rim mounted applications Suitable for use with all access control systems Exposed areas Standards and Compliance CE Approved C-Tick Certified IP56 Rated Specification Voltage12Vdc & 24Vdc Current250 mA @ 12Vdc - 125mA @ 24Vdc SolenoidSolenoids rated for continuous use. MonitoringNone Holding Force680kg Static Strength Rating EnduranceCycle tested to 1,000,000 operations EnvironmentOperational temperature range - 20°C to +60°CWeather resistant construction available (IP56) BodySolid Stainless Steel Construction KeeperStainless Steel Specification StatementThe electric strike must be suitable for surface mount applications for use with rim or surface mount door locks. Where Power To Lock and Power To Open functions may be required in the same building, an individual strike is interchangeable from either "Power to Lock" or "Power to Open" on site. The electric strike should not consume current greater than 243mA @ 12Vdc or 187mA @ 24Vdc. Certifications must include CE and C-Tick. The strike should be tested to 1 million operations and have a minimum holding force not less than 680kg._________________________________________________________ Dimensions Close Downloads Electromechanical Door Solutions.pdf (.pdf, 6.5 MB) Lockwood Electric Strikes Catalogue.pdf (.pdf, 980 kB) Lockwood ES150 Installation Instructions.pdf (.pdf, 602 kB) Close Part numbers Trade Pack Description Part Number ES150 12/24VDC Fail Safe Non Monitored ES150-1M Note: Change from Fail Safe (PTL) to Fail Secure (PTO) as required. Close Where to buy? Find your local Lockwood stockist. Lockwood ES9000 Pre-Load Electric strikeOperates with up to 25kg of pre-load pressure on the keeper. Lockwood ES2000 Monitored Electric StrikeFail safe/fail secure changeable on site. Lockwood ES2100 Monitored Electric StrikeFail safe/fail secure changeable on site.