Lockwood Padde Series Weather Resistant Electromagnetic Lock The Z8 weather Resistant Electromagnetic Lock operates with holding a force up to 580kg. Covering a range of applications this magnet is ideal for applications where it is exposed to the weather. With fixing options including wood, aluminium and steel constructions, the range caters to most external needs. The Electromagnet is available in monitored models using Hall-Effect monitoring. An additional advantage is the ability to select either 12V or 24V DC application on site. Key Features Fail-safe: unlocks when power is removed Easy installation: suitable for both new and retrofit usage Self-alignment: armature plate pivots to accommodate door drop Silent operation: no humming or buzzing Dual voltage: site selectable 12 or 24 Vdc Monitored versions: Hall-Effect status monitoring available Monitoring Hall / Bond MonitoringHall Effect position sensors are non-contact devices that convert energy from a magnetic field into an electrical signal. This indicates that the lock is powered and that the armature plate is in position and magnetically bonded (it monitors if the magnet is locked) Applications Outdoor / Exposed doors Doors located in coastal areas Standards and Compliance CE Approved C-Tick Certified Specification Z8 Weather Resistant ElectromagnetHolding Force 550KG - 580KGVoltage 12Vdc/ 24Vdc ±10%Current 512mA @ 12Vdc 256mA @ 24VdcMonitoring Hall-EffectOperating Temperature -10 to 55 DegreesOperating Humidity 0-95% Specification StatementThe Weather Resistant Series Electromagnetic Lock should be constructed in an aluminium case with heavy duty electromagnet. The range only operates in fail safe mode and relies on a secondary lock or battery backup system. In some cases the magnet armature plate pivots to accommodate door drop. _________________________________________________________ Dimensions (L)230 x (H)67 x (D)43 mm Close Downloads Electromechanical Door Solutions.pdf (.pdf, 6.5 MB) Lockwood Electromagnetic Locking Catalogue.pdf (.pdf, 1.3 MB) Z8-WR Wiring Instructions.pdf (.pdf, 371 kB) Close Part numbers Trade Pack Description Part Number EMZ8 E/Magnet Weather Res 12/24Vdc SingleMonitored EMZ8-WSM Close Where to buy? Find your local Lockwood stockist. Lockwood Wall and Floor Mounted Hold-Open MagnetsFail safe operation. Unlocks when power is removed. Lockwood Z4 and Z8 Double Monitored Electromagnetic LocksSite selectable dual voltage, 12 or 24 Vdc. Lockwood Z4 and Z8 Single Monitored Electromagnetic LocksSite selectable dual voltage, 12 or 24 Vdc.