Lockwood 3580 Series Electric Mortice Lock Lockwood 3580 Series Electric Mortice Lock Lockwood 3580 Series Electric Mortice Lock Designed and manufactured in Australia, the 3580 series electric mortice is a high performance lock of superior quality. It is constructed from high grade zinc alloy, with a stainless steel latch bolt and face plate and is suited for all commercial applications. The lock can be operated by push buttons,intercom systems and key switches; or integrated with electronic access control systems for use with higher security devices such as keypads or card readers. The 3580 series is available in a wide variety of configurations to suit varying requirements and is especially suited to narrow style or short backset applications. Key FeaturesAvailable in non monitored and monitored versions. Monitoring features Dead latched Door position/reed switch Key override Request to exit/REX Available configurations Fail safe or fail secure 12Vdc or 24Vdc Field changeable monitoring contacts - normally closed, normally open Field changeable handing - Left hand and right hand doors Selection of free lever or locked lever on both sides of the door Key override monitoring LED indication Standards and Compliance S3 (Security) Australian Lock Standard (AS4145.2.1993) D3 (Durability) Australian Lock Standard (AS4145.2.1993) C-Tick Certified Specification VoltageAvailable in 12Vdc or 24Vdc Current12Vdc ± 5% 250mA (max)24Vdc ± 5% 125mA (max) LED CurrentWhen LED's are fitted, add 15mA (max) to total current draw MonitoringKey overrideDeadlatched and door closedRequest to exitHub/Deadlatch/Key override monitor: max ratings 500mA at 30VdcDoor Status Monitor: max ratings 3W, 250mA (max) at 12Vdc,125mA (max) at 24Vdc EnvironmentOperational temperature range -20°c to + 60°c Case/CoverHigh purity zinc alloy construction Backset23mm standard. 25.4, 30 & 38 mm extended available Latch bolts15mm Stainless Steel construction Door Clearance3 - 6.5 mm Door thicknessStandard applications 32 to 50mmExtension kits available CylinderStandard Lockwood oval shaped cylinders Cabling3.6 metre length of cable with 9 pin socket supplied with each lock.Recommended cabling: 18AWG (0.82mm²) cable runs up to 30m FurnitureCompatible with Lockwood series door furniture Standard FinishesSatin Chrome(SC) standard. Bright Chrome (CP) and Polished Brass(PB) finishes available Note: For detailed electrical specifications, please refer to catalogue. Specification StatementThe lock should be capable of operation on voltages of 12 or 24Vdc and have a current consumption not more than 250mA (max) @12Vdc and 125mA (max) @24Vdc. Monitored locks must be capable of monitoring the following functions: Key override, door position/reed switch& independent hub/ Request to exit. All monitoring outputs must have the ability to be wired independently. The lock must be capable of operating fail safe or fail secure, left or right hand, and have field configurable hub selection. _________________________________________________________ Dimensions Close Downloads Electromechanical Door Solutions.pdf (.pdf, 8.4 MB) Lockwood Electric Mortice Locks Catalogue.pdf (.pdf, 2.6 MB) Close Part numbers Trade Pack Description Part Number Anti-Clockwise Rebate KitReplace ## with finish code (SC, CP, PB) 3580-2902AC## Clockwise Rebate KitReplace ## with finish code (SC, CP, PB) 35802902CW## LED Assembly to suit 3570/3580 SP572-3129 7.5m extended 9 wire cable SP3580-1052 AccessoriesRebate kits to suit 13 mm rebated timber doors with a minimum backset of 30 mm includes an adaptor to mount the lock and a special strike plate. Handing of the rebate kits is determined by the opening movement of the door on which the lock is fitted. Finish Anti-clockwise Clockwise Satin Chrome 3580-2902ACWSC 3580-2902CWSC Bright Chrome 3580-2902ACWCP 3580-2902CWCP Polished Brass 3580-2902ACWPB 3580-2902CWPB Note: Refer to catalogue for Ordering Procedure, Cylinder information and Electrical Specifications. Close Where to buy? Find your local Lockwood stockist. Lockwood 3570 Series Electric Mortice Lock60mm, 89mm or 127mm backset models available. Lockwood Hi-O Room Guard Locking SystemOne touch privacy with plug and play connectivity. Lockwood Power Transfer LeadEnsure unbroken transfer of wires between door and frame.