Lockwood Padde Series ES200 Electric Strike Lockwood Padde Series ES200 Electric Strike Lockwood Padde Series ES200 Electric Strike The ES200 series electric strikes are high security products manufactured from stainless steel and designed for use with all access control systems. The strikes are suitable for use with hinged doors which require either fire or security control as part of a building management system. These strikes are flexible and can be changed from fail safe to fail secure, mounted on the left or right hand side of the door and are available in 12 or 24Vdc. They offer a strong, dependable and long-lasting electric strike solution. Key Features Fail safe/fail secure changeable on site High security 4 Hour fire rating 850kg holding force 1 million cycles endurance rating Cast stainless steel body Stainless steel locking pins Low Current consumption - Max 175mA @12Vdc Mounting kit supplied as standard TRICARE® 5 Year Warranty Applications High traffic areas Fire rated door sets Open in/open out doors Suitable for use with all access control systems Standards and Compliance S3 (Security) Australian Lock Standard (AS4145.2.1993) D3 (Durability) Australian Lock Standard (AS4145.2.1993) BS 5872 Approved Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets) Approved to UL1034 (highest level) CE Approved C-Tick Certified Specification Voltage12 or 24Vdc Current175 mA @ 12Vdc - 88 mA @ 24Vdc SolenoidsSolenoids are rated for continuous use MonitoringNone Holding Force850kg Static Strength Rating EnduranceCycle tested to 1,000,000 operations LatchSuitable for 15mm latch bolt with 3mm door gap EnvironmentOperational temperature range -20°C to +60°C BodySolid Stainless Steel Construction KeeperStainless Steel Specification StatementThe strike should be constructed of stainless steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. The one strike must be changeable from fail safe to fail secure on site where required. The strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use. Certifications must include CE, C-Tick and 4 hr fire rating. _________________________________________________________ Dimensions Close Downloads Electromechanical Door Solutions.pdf (.pdf, 8.4 MB) ES200 and ES2000 Installation Instructions.pdf (.pdf, 342 kB) Lockwood Electric Strikes Catalogue.pdf (.pdf, 1.1 MB) Close Part numbers Trade Pack Description Part Number ES200 E/Strike 12Vdc Fail Safe Non Monitored ES200-1 ES200 E/Strike 12Vdc Fail Secure Non Monitored ES200-2 ES200 E/Strike 24Vdc Fail Safe Non Monitored ES200-3 Note: Change from Fail Safe (PTL) to Fail Secure (PTO) as required Accessories Description Part Number 13mm Rebate Plate 210100-541 Mounting Kit 220200-519 Note: If Extension Lips are required, use ES2100 Electric Strike (Refer to catalogue) Close Where to buy? Find your local Lockwood stockist. Lockwood ES2100 Monitored Electric StrikeFail safe/fail secure changeable on site. Lockwood ES9000 Pre-Load Electric strikeOperates with up to 25kg of pre-load pressure on the keeper. Lockwood ES2600 Panic Bar Monitored Electric StrikeFail safe/fail secure changeable on site.