Lockwood Padde Series Z4 and Z8 Double Monitored Electromagnetic Locks Lockwood Padde Series Z4 Double Electromagnetic Lock - Monitored Lockwood Padde Series Z4 Double Electromagnetic Lock - Monitored Lockwood Padde Series Z8 Double Electromagnetic Lock - Monitored The Double Series Electromagnetic Locks operate with holding forces from 500kg up to 1160kg. Covering a range of applications these magnets are ideal for applications from access ways through to high use commercial swing doors. With fixing options including wood, aluminium and steel constructions, as well as glass door applications, the range caters to most electromagnetic needs. Key Features Fail-safe: unlocks when power is removed Easy installation: suitable for both new and retrofit usage High holding force: refer to the technical data overleaf Self-alignment: armature plate pivots to accommodate door drop Silent operation: no humming or buzzing Dual voltage: site selectable 12 or 24 Vdc Monitoring; Hall-Effect and Reed Switch monitoring on all models Instantaneous release: Smart electronics on the Z Series electromagnets eliminate residual magnetism. Applications Aluminium doors Double swing doors Access control Surface mount for inswing and outswing doors Monitoring Hall / Bond MonitoringThis indicates that the lock is powered and that the armature plate is in position and magnetically bonded (it monitors if the magnet is locked) Reed switch monitoringAn integrated reed switch monitors the door position separately (it monitors the position of the door) Standards and Compliance Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets) CE Approved C-Tick Certified Specification Z4 MagnetHolding Force 500kg - 560kgDimensions (L)476 x (H)48 x (D)27 mmVoltage 12Vdc/ 24Vdc ±10%Current 900mA @ 12Vdc 450mA @ 24VdcMonitoring Hall-Effect/Bond sensing Reed SwitchOperating Temperature -10 to 55 DegreesOperating Humidity 0 - 95% Z8 MagnetHolding Force 1100kg - 1160kgDimensions (L)532 x (H)72 x (D)40 mmVoltage 12Vdc/ 24Vdc ±10%Current 1024mA @ 12Vdc 512mA @ (12Vdc)Monitoring Hall-Effect/Bond sensing Reed SwitchOperating Temperature -10 to 55 DegreesOperating Humidity 0 - 95%Holding force is measured directly between armature and magnet, holding force on the door may vary depending on the leverage created.Specification StatementThe Double Series Electromagnetic Lock should be constructed in an aluminium base with heavy duty electromagnet. The range only operates in fail safe mode and relies on a secondary lock or battery backup system. The lock needs to be equipped with "smart electronics" that have zero residual magnetism, (instantaneous release). This is crucial for correct operation. _________________________________________________________ Dimensions Close Downloads Electromechanical Door Solutions.pdf (.pdf, 6.4 MB) Lockwood Electromagnetic Locking Catalogue.pdf (.pdf, 1.3 MB) Close Part numbers Trade Pack Description Part Number EMZ4 E/Magnet 12/24Vdc Double Monitored EMZ4-DM EMZ8 E/Mag 12/24Vdc Double Monitored EMZ8-DM Accessories Description Part Number EMZ4 Bracket Double L & Z EMZ4B-DLZ EMZ4 Bracket Armature Monitored W/Magnet EMZ4B-AM EMZ4 Bracket Double Mounting Plate EMZ4B-DMP EMZ4 Spare Part Screw Kit EMZ4SP-SC EMZ4 Spare Part Pcb Monitored EMZ4SP-PCBM EMZ8 Bracket Double L & Z EMZ8B-DLZ EMZ8 Bracket Armature Monitored W/Magnet EMZ8B-AM EMZ8 Bracket Double Mounting Plate EMZ8B-DMP EMZ8 Spare Part Screw Kit EMZ8SP-SC EMZ8 Spare Pcb Monitored EMZ8SP-PCBM Close Where to buy? Find your local Lockwood stockist. Lockwood Z4 and Z8 Double Non Monitored Electromagnetic LocksSite selectable dual voltage, 12 or 24 Vdc. Lockwood Z4 and Z8 Single Non Monitored Electromagnetic LocksSite selectable dual voltage, 12 or 24 Vdc. Lockwood Z4 and Z8 Single Monitored Electromagnetic LocksSite selectable dual voltage, 12 or 24 Vdc.