Lockwood 781/791 Series Panic (Skeleton) Bolts Lockwood 781/791 Series Panic (Skeleton) Bolts Lockwood 781/791 Series Panic (Skeleton) Bolts The Lockwood 781/791 Series Panic (Skeleton) Bolts are ideally suited to doors where barrel bolts would be inadequate and where a high degree of strength and durability are required, Single action bolt with positive locking into keeper at the top or bottom of the door. When fixed to the door the bolt is supported by a high grade stainless steel spring which holds the bolt in the locked position. Available with both visible and concealed fixing suitable for timber, metal doors and gates in commercial, industrial, institutional and residential buildings, where there is a need for high grade, durable fittings.These bolts are generally installed on the inactive leaf of double doors or doors where there is no need for primary egress. Each pack contains items necessary for timber door fixing. Specification Bolt ThrowThe bolt throw is the distance the bolt moves from the fully retracted position to the fully locked position. Standard throw is 50 mm. Offset BoltOffset bolts in visible fix only available in the following lengths: 450 mm and 600 mm. FixingAvailable in both visible and concealed fixing with 6 point fixing up to 1000 mm in length. Concealed fixing is ideal for an installation where a more aesthetic appearance is required. Sufficient screws are supplied with all bolts. Each bolt is supplied with a floor plate and top guide. These can also be purchased as spare parts. SecurityAll 781/791 panic/skeleton bolts conform with Level S2 (Physical Security) Mechanical Locksets for Doors in Buildings to Australian Standard (No. AS 4145.2-1993) for deadbolts. DurabilityAll 781/791 panic (skeleton) bolts conform with Level D3 (Durability) Mechanical Locksets for Doors in Buildings to Australian Standard (AS 4145.2-1993) for deadbolts. LengthsAvailable in the following lengths: 230mm, 300mm, 450mm, 600mm, 1000mm. Bolt MaterialAll Lockwood panic/skeleton bolts and accessories are made of the highest grade brass material. Standard FinishSatin Chrome Plate SC Close Downloads Lockwood Panic Exit Devices Catalogue TEMP offline.pdf (.pdf, 1.8 MB) Close Part numbers Trade Pack Panic (Skeleton) Bolts Concealed Fix Description Part Number Barcode 230mm, Satin Chrome 781X230SC 93-11847-82331-0 300mm, Satin Chrome 781X300SC 93-11847-79404-7 450mm, Satin Chrome 781X450SC 93-11847-81469-1 600mm, Satin Chrome 781X600SC 93-11847-79283-8 1000mm, Satin Chrome 781X1000SC 93-11847-82332-7 Visible Fix Description Part Number Barcode 230mm, Satin Chrome 791X230SC 93-11847-79388-0 300mm, Satin Chrome 791X300SC 93-11847-79237-1 450mm, Satin Chrome 791X450SC 93-11847-79239-5 600mm, Satin Chrome 791X600SC 93-11847-79240-1 1000mm, Satin Chrome 791X1000SC 93-11847-79238-8 Note: Standard Bolt Throw = 50mm Offset Panic (Skeleton) Bolts Visible Fix 'Offset' Description Part Number Barcode 450mm, Satin Chrome 791O/SX450SC 93-11847-80556-9 600mm, Satin Chrome 791O/SX600SC 93-11847-74570-4 781/791 Panic (Skeleton) Bolt Accessories Description Part Number Barcode Visible Guide SP837SC 93-11847-74576-6 Spring Concealed SP838 93-11847-74578-0 Spring Visible SP839 93-11847-76375-3 Close Where to buy? Find your local Lockwood stockist. Lockwood Casement StaysSteel and zinc alloy casting casement stays. Lockwood 8530 Special Latch Assembly60mm, 70mm and 127mm backsets. Lockwood 810 Series Mortice Mounted Toilet BoltsIndicator denotes whether a room is occupied or vacant.